Bearing & Tool Centre

Non-destructive tests are performed in a manner that does not affect the future usefulness of the object or material being tested 

Item Code: UTG-27

FEATURES:
Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement.
With high power of emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies. That makes it
s, e. g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron.
Automatic power off to conserve power.
Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface .

Display : 4 Digit Backlit LCD
Range : 1-400mm(45# Steel) inch/mm switchable
Resolution : 0.1mm/ 0.01mm switchable
Accuracy : ±0 .5%n + 0.1mm
Sound Velocity : 500-9000 m/s
Operating Condition : 0-40°C/ Humidity <80%
Power : 1.5v x 4 (UM 4 Battery)
Size & Weight : 130 x 76 x32mm 340gm without battery
Standard Accessories : 
Ultrasonic Sensor, Oil, User Manual &
Hard Carry Case.
Optional Accessories
RS 232C PC Interface Cable/USB Adaptor & Software
Blue Tooth

Optional Probes & Calibration Block :
PT-06mm For Small & Curve Surfaces/Pipes
PT-08mm Standard Probe
Calibration Step Block

Item Code: UTM-5

Features:
 

• Used the exclusive Micro-computer LSI circuit and cryeel, Cast iron, Aluminum, Red copper
• Automatic power off to conserve power
• Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface

Specifications:

Item Code: UTM-9

Features:
 

• Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement
• With high power of emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies. The make it easy to measure the rough surface, even cast iron. It is widely used in almost all kinds of industries
• Applicable to measure the thickness of many materials, e.g. Steel, Cast iron, Aluminum, Red copper
• Automatic power off to conserve power
• Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface

Specifications:

Item Code: Shore-A

Features:

• Metrix Shore "A" Durometer conforms to international standard ISO7619, ISO868, DIN53505, ASTM2240, JIS K7215
• Exclusive Microprocessor LSI circuit and crystal time base enables high accuracy and digital display gives exact reading with no error or guessing
• Shore "A" Hardness tester capable of measuring value between 0-100 shore for rubber like substrates Rubber, Elastomer, Neoprene, Silicone, Vinyl, Soft plastic, felt, leather etc
• Compatible with PC connectivity RS 232C interface and software

Technical Specifications:

Item Code: MI-970

Testing Features
* Small in size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HSD, HL.
* Memory could store 50 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computerfor statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.

Technical Specifications
* Display: Large LCD with back light.
* Accuracy: Display error ±0.8% at LD=970.
* Measuring range: 170-970L.
* Conversion: HL-HRC-HRB-HB-HV-HSD.
* Materials: 9 different common materials.
* Memory: 50 Groups Including Single.
* Impact device: D Will handle the majority of hardness testing applications.
* Power supply: 2x1.5V AA size battery.
* Dimension: 146*65*36mm.
* Weight: 130g (not including batteries).
* Working temperature: - 10°C~ +50°C.
* Storage temperature: - 30°C~ + 50.
* Standard Accessories: Impact Device D, Test Block, Small Ring, Cleaning Brush, Manual & Carry Case.
* Optional Accessories: RS 2320+ Software, Support Ring Set, Irregular Impact Device, B Nylon Brush.

Item Code: Metrix-130

Typical Application & Testing Features:

• Die cavity CF Molds
• Palm size for narrow space
• Test at any angle. even upside down
• Direct display of hardness scales HRB, HRC, HV, HB. HSD, HL
• Large memory could store 250 groups including single measured value, impact direction, material and 

Technical Specifications: