Mitutoyo - Discount 7%

Product Details:

Features:

• For measurement of the pitch diameter of thread
• Interchangeable anvils depending on the screw shape
• For measurement of the pitch diameter of thread Fixed anvil

Product Details:

Features

• Caliper type jaws are made of high-grade, tool steel.
• Locking clamp for positive locking of spindle.
• Satin-chrome finished.
• A special holder is available to be used with Mitutoyo Micrometer Stand.

Product Details:

Features

• IP65 water/dust protection (Series 342).
• Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions.
• 15 degree and 30 degree measuring points
  are available.
• The measuring points have approximately 0.3mm / .012” radius.
• With Ratchet Stop for constant force.
• With SPC output (Series 342).
• With digit counter (Series 142).
• With a standard bar except 0 - 25mm and 0 - 1” model.
• Supplied in fitted plastic case.

Product Details:

Features:

• The Holtests (type II) have three contact points made of alloyed steel.
• Measurement can be taken closer to the bottom of the blind bore.
• Can measure deep holes using an Extension Rod (optional).
• With Ratchet Stop for constant force.
• Setting Rings for zero point adjustment are optional.
• Supplied in fitted plastic case up to 100mm / 4". Over 100mm / 4" supplied in wooden case.

Product Details:

Tubular Inside Micrometers Series 137-Extension Rod Type,Series 139-Extension Pipe type,Series 140-Extension Pipe TypeSeries 137Features

• Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head.
• Carbide-tipped measuring faces are available. (series 137)
• The 139 and 140 series use highly-durable/ large-diameter extension pipes.
• Series 137 supplid in fitted plastic case except 1550mm/60in come in wooden case.
• Series 139 supplied in fitted wooden case except 500mm/20in come in plastic case.
• Series 140 supplied in fitted wooden case. 

Product Details:

Features:

• The jaws have round measuring faces for accurate ID measurement.
• With fine adjustment carriage to feed the slider finely. (without 160-130~134)
• Inside and outside measurements can be directly read from the upper and lower slider graduations, respectively.
• Supplied with vinyl holster in fitted carton. Except 300mm / 12”,
  450mm/18” and 600mm/24” are fitted
  carton only. Over 600mm/24” supplied in wooden case.

Product Details:

Features

• Built in absolute linear encoderThis encoder eliminates the necessity of setting the reference point at every power-on. It has improved reliability because no over-speed error will occur.
• Rigid column structure ensures high measuring accuracy.
• With large smooth slider feed wheel.
• Carbide-tipped scriber is provided.
• With SPC data output.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: within 3 days or subject to availability

Product Details:

We, that is Bearing Tool Centre is a premium supplier of laboratory equipment. If you are looking for quality laboratory testing and measuring equipment, then trust us to believe our words. We value our customers and understand the importance of the equipment. Hence, we supply all the products at the doorstep of the customers on time. To believe our words, buy our Digital Mitutoyo Dial Thickness Gauge and see how it works. You will certainly the product as we never compromise with the quality of the product and supplies “A” grade products to our customers. Give us an opportunity to serve you as we promise to deliver the best.

• Dial thickness gages can quickly measure the thickness of thin products such as paper and felt.
• Contact point and anvil are both made ofceramic: rust-free (547-401 is excluded.)
• Integrated molding of the bezel and crystal ensures protection against water and oil penetration via the front face

Additional Information:

• Item Code: 7301

Product Details:

Buying laboratory measuring and testing equipment are not enough; make sure that you buy the best quality equipment of reputed brands. When you want a quality and branded equipment, trust us that is Bearing Tool Centre and get the quality product at pocket-friendly price from us. We deliver products at the doorstep of the customers and do not charge any shipping charge. You can rely on us for remarkable laboratory measuring and testing equipment like Mitutoyo Bore Gauge . For further information on our products, give us a call today and get assistance from our professionals. We will be happy to serve you.

Features:

• Can measure ID at position close to the bottom of blind holes.

Product Details:

Features:

• Used with an outside micrometer for measuring inside diameter of bores.
• 4 sizes of gages are supplied in a fitted case.
• Extra long for gaging deep and shallow holes, slots, and similar workpieces.
• Gaging surface is fully hardened to insure long tool life.

Additional Information:

• Item Code: 154-902
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: within 3 days or subject to availability

Product Details:

Features:

• Radius size is stamped on each gage.
• Both concave and convex radius gages become a pair.
• With a locking clamp

Product Details:

Features
• The new design of the MDC-S allows for simple operation.
• A larger LCD display allows the user to read all measurements with ease.
• The addition of the automatic power (ON/OFF) function assures long-lasting battery life.
• Slim, lightweight construction for easy, one-handed operation as compared to a conventional digital micrometer.

Product Details:

Features:

• IP65 water/dust protection 340 series models with a range up to 12in/300mm.
• Wide measuring range with interchangeable anvils.
• With a Ratchet Stop for constant force.
• Supplied with zero-setting standards bar for each range.
• With SPC output (Series 340).
• Supplied in fitted wooden case.

Function of Digital Model
Zero-setting, Data hold, Preset, Data output, inch/mm
conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Product Details:

Additional Information:

• Item Code: 123-101
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: Ex stock or within 2 - 3 days

Product Details:

Features:

• Caliper type jaws are made of high-grade, tool steel.
• Locking clamp for positive locking of spindle.
• Satin-chrome finished.
• A special holder is available to be used with Mitutoyo Micrometer Stand.

Product Details:

Are you confused as which supplier to rely when it comes to buying laboratory measuring and testing equipment? One name that you must remember is Bearing Tool Centre. We are an ISO 9001:2000 company and have the best professionals with us who are outstanding in providing assistance to our clientele. If you doubt about the quality of the products that we supply, all you can do is read the testimonials of the satisfied clients and then proceed to buy from us. For further information, send us an email. We will get back to you shortly and will help you to buy Mitutoyo Dial Vernier Caliper Least Count 0.01 MM.

Dial Vernier Caliper Least Count 0.01 mm - The sizes offered offered by us are as follows:

• 150mm x 0. 01mm
• 150mm x 0. 02mm
• 150mm x 0. 05mm
• 200mm x 0. 01mm
• 200mm x 0. 02mm
• 200mm x 0. 05mm
• 300mm x 0. 02mm

Product Details:

Product Details:

Features

• Made of hardened stainless steel.
• Base and measuring faces are hardened and micro-lapped.
• Optional wider extension base are available.(up to 450mm range models
  
  

Product Details:

With the emergence of online shopping, you can now buy the best quality Mitutoyo Bevel Protractor from us, that is Bearing Tool Centre. All our products are wonderful and comes from the house of reputed brands. When you visit our website, you will not think of buying from other supplier of laboratory measuring and testing equipment as we offer the best price to our customers. You can save quite a hefty amount when you buy from us. Trust us and get the incredible laboratory measuring and testing equipment from us. we not only supply but also provide demo to our customers.

Features:

• Consists of three sheets of stainless steel,the middle one of which is made for angle measurements.

Product Details:

We, at Bearing Tool Centre supply quality product to our customers. Our laboratory equipment comes from the house of reputed brands and are unmatched in quality. Moreover, you will find all our laboratory equipment updated and advanced. So, if you have been looking for Mitutoyo Dial Height Gage with Digital Counter, visit our website or walk into our store for buying. If you have any queries, send us an email or give us a call, we will get back to you shortly and will help you to choose the right equipment for your need. Our professionals will guide you to the right path.

Features:

• Easy and error-free reading with both up and down digital counters as well as a dial.
• Provided with a feed wheel for easy coarse feeding.
• Carbide-tipped scriber is provided.
• The counters and dial can be re-zeroed at any scriber position.

Product Details:

Dial Indicators Series 2- Metric Standard TypeSeries 2FeaturesSeries 2 dial indicators are Mitutoyo’s most popular, and have the widest application.

• Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
• The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
• The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
• A carbide contact point is used.
• The grand gear uses stainless steel that is resistant to wear and deformation.
• Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant

Additional Information:

• Item Code: 2046

Product Details:

If you have been looking for Mitutoyo Dial Test Indicator, then the right place for you is  You will get the best product from us and that too at an affordable price. We deliver all products at the doorstep of the customers. We do not charge any shipping cost from our customers and all the products are delivered on time. Now, no more confusion as from where to buy as we are there for your help. You will certainly like the equipment that we supply and we are sure that you will consider us in future when you need to buy other laboratory measuring and testing equipment.

Features Of Series 513:

• Jeweled bearings assure higher sensitivity and accuracy.
• Reversible measuring direction.
• Two holding bars are supplied. (Full sets only.)
• Fully adjustable bezel/dial face.
• Contact point is adjustable within 220°.
• Bezel is sealed with on O-ring to keep out water/oil.

Product Details:

From the beginning, we, that is Bearing Tool Centre has made an indelible mark in the calibration industry. We claim to be the supreme in the mark when it comes to supplying laboratory testing and measuring equipment. Consumers prefer best products like Mitutoyo Digimatic Dial Gauge at a reasonable price. If you are also not an exception, then keep eye on our website to grab latest deals. You can save a considerable amount when you grab the deals. We make use secured mode of payment option. So, when it comes to making the payment online, you must not worry as we will keep you protected.

Features

• As compact as standard Series 2 dial indicators.
• Large, easy-to-read LCD.
• GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/down movement can be toggled.
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
• With SPC data output.

Product Details:

Product Details:

When it comes to buying anything, consumers prefer the best product at an affordable price and this is no exception with Mitutoyo Vernier Caliper Simple L.C 0.02 MM 0 001 Inch. We, at Bearing Tool Centre supplies branded laboratory measuring and testing equipment and assure you that you can get it at pocket-friendly cost if you can grab the deals that we give for customers often. Our products come with a quality stamp and works outstandingly when used. For any assistance regarding the application of the equipment, get in touch with us and our professionals will serve you accordingly.

Product Details:

digital vernier caliper  7% discount mitutoyo +18% gst
500-196 : 0-150 : 6950
500-197 : 0-200 : 8480
500-754 : 0-300 : 18680
500-505 : 0-450 : 40494
500-506 : 0-600 : 44169
500-507 : 0-1000 : 80155

Additional Information:

• Item Code: 500
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Ahmedabad
• Delivery Time: Ex stock

Product Details:

Product Details:

Product Details:

Additional Information:

• Item Code: 209 - 106

Product Details:

Product Details:

Product Details:

Features:

• Metric thickness gages are available with tapered leaves.
• Each leaf is marked with its thickness.
• Each leaf is detachable if necessary.

Product Details:

Additional Information:

• Item Code: 960 - 603

Product Details:

Product Details:

We at Bearing Tool Centre take pride in supplying a wide range of laboratory measuring and testing equipment to our customers. you will not only find Ultra Hardened with us but a wide range of equipment options. Place your order online and get the product right at the doorstep without paying any shipping charge. We ship worldwide and make sure that all the products are delivered on time. Visit our website grab the latest offer for buying measuring tools. We are matchless and supply the best product reasonably priced. You will be in love with our measuring equipment.

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• It can be used on the base, ends & sides.
• Sturdy clamps for better clamping of jobs.
• End face grinding, right angle with sides is possible.

Product Details:

Product Details:

Features:

• Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery.
• Base and measuring faces are hardened and micro-lapped.
• Optional wider extension base are available. (up to 450mm range models)
• With SPC data output.

Product Details:

Features:

• Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter(or groove width).
• With a knurled clamp.

Product Details:

Product Details:

Features:

• Thread pitch size is stamped on each gage.
• Metric,Unified,and Whitworth screw pitch gages.