Bearing & Tool Centre

Prism / Textile Jaw / Roller Setting Vernier Caliper

Features:

• Useful for roller distance setting for the textile industry.
• Can also check Outside & Inside diameter measurements.
• Scale laser marked & satin-chrome finished for error free reading.
• With thumb block for easy movement of the slider.
• With locking screw.

Packing: Vinyl pouch covered with card case / Plastic case

Rs. 2000/- to be added for Stand Type digital Dial Thickness Gauge with Dead Weight.Discount : 4%

• Prism jaw / Textile / M type Digi Vernier
• Inside Jaw attachment in vernier over 300 mm
• Digi Outside Groove vernier
• Digi Inside Groove vernier 10 - 150 x 0.01 mm

●Voice service LCD and scale readings are double guarantee the accuracy of the test values. When in-site test in case without power still can get the measure results through the scale. Voice service can improve the efficiency of work at special environment.

●Machine core applies imported metal material high precision long service life.

●The host and sensor integration design easy to operate and efficient.

●High-resolution LCD color screen 176*220

●Power source is 4 pcs of AA alkaline batteries

●USB fast communication with PC

● Easy to operate friendly system interface

●Non-contact metal reflection grating + reflective encoder sensing high accuracy

●The difference between displayer and scale <=0.5

Are you looking for accurate Surface Comparison Chart If so, then bearing tool centre is the one-stop destination. Your search ends here. So, visit our website and buy the equipment from us. you will get the incredible laboratory measuring and testing equipment from us at never before price. We supply a wide range of products to our customers. Our professionals will provide required demo to you as how to use the equipment. Give us a call or send us an email for further information.

We Bearing Tool Centre are a top rated organization engaged in retailing a wide range of pistol calipers that are designed as per the industry standards. The range that is available with us includes those from popular brands like Mitutoyo, Baker, Groz, Kann, Metrix and Kristeel and hence is made from the high quality raw material under the supervision of skilled engineers and workforce. In one word, these pistol calipers can be defined as “robust” in terms of construction. You can stay stress-free of the measurement which is taken into concern while designing these calipers. These pistol calipers are usually used for observing the transfer measurements or for comparison of the internal and external measurements.

• Application - Used for measuring wall thickness of tubes / pipes
• It is also useful for taking measurements at locations which are out of reach of micrometers & vernier calipers

Insert the tapered end of the standard test bar after cleaning into the space provided between the ball and the plunger and slide it further beyond the tapered position. The test bat will thus be firmly gripped between the ball and the plunger pressed by a spring. The specimen to be tested be properly ground or filed and polished at the surface where it is to be tested to ensure accurate readings, With standard test bar inserted place the tester vertically on the specimen such that the ball touches the polished surface. Give a blow on the top of the plunger, with a hammer.

The blow should not be very hard and should as vertical as possible. The blow will cause two indentations, one on the standard test bar and the other on the specimen. The diameters of these two indentations should be measured accurately with magnifier having, lease count of 0.1 mm provided with the machine. If the indentations so obtained are slightly elliptical, average diameter should be found out. The distance between the centers of any two indentations on standard test bar should be less than 15mm. If the bar is fully utilized it has to be replaced. The limiting indentation diameter on the standard test bar is 4.2mm.

EXAMPLE

Diameter of ball indentation -

1) On the test bar 1.8 mm.

2) On the specimen (steel in natural condition) 1.7 mm.

Tensile strength founds from Tables 50.8 tone/sq. inch after multiplying with 1.575 to convert in to kg/sq. mm comes to 80 Kg./sq.mm.

Brinell Hardness Number found from tables 225 BHN.

Multiplying factor inscribed on standard test bar: 1.14. Therefore, the tensile strength of specimen is 80 x 1.14 = 91.20 Kg/sq. mm in and the Brinell hardness = 225 x 1.14 = 256.5 BHN. When after some use, the protruding end of the plunger gets deformed by blows, it may be reconditioned and rounded off again or simply replaces.

Poldi type Impact Hardness Tester is not designed to replace the tensile strength testing machine or standard hardness tester. The accuracy of this hardness tester may very sometimes to the extent

Simple operation, each Cross Hatch Cutter has 6 cutting blades spaced either 1mm or 2mm apart, one cutting pass makes 6 cuts in the coating, a second pass at 90° makes a square lattice pattern. Apply Adhesive Tape over cut section and within 5 minutes remove tape. Classify the cut area according to the relevant national standard classification guide.

The cutting blades are ground onto 6 cutting sides, so that when one cutting side becomes blunt there are a further 5 cutting sides to use. Therefore giving a 1/3 rd extra life over conventional 4 sided models.

This Cutter complies with ISO, BS, DIN and ASTM methods of measurement.

 The cross hatch cutter will allow an assessment to be made of

the adhesion resistance of coatings to separation from substrates

when a right-angled lattice pattern is cut into the coating and

penetrates through to the substrate. Coating is cut into small

squares using cross cuts and reduces lateral bonding, and the

adhesion assessed against ISO, ASTM or customer

specifications. The coating thickness determines the cutter size

used. The 1mm cutter is suitable for coatings under 60 microns;

the 2mm cutter is suitable for coatings over 60 microns. Cross

hatch cutter with 1mm with 11 teeth also available

Upad VX Series: Cast iron special ball rate detection 

Upad VX Series ultrasonic non-destructive measurement of sound velocity meter will rate the ball to the limit; provide rapid rate of detection of ultrasound to determine the rate of automobile ball safety components.

Taking into account the reliability, performance and durability, no matter where you detect, VX Series ball rate meter is your most trusted, most hard working partner. This innovative ball rate instrument will provide a superior user experience. In case there is the next test block, also applies to the creep rate measurement,

Cast iron ball suitable for measuring the rate (creep rate), in line with JB / T9219 standard; sound velocity measurement applies to metals, plastics, ceramics, glass, fiber glass and any other good ultrasonic wave conductor.

So as to meet all the demands and needs of our clients, we Bearing Tool Centre have come up with a wide range of Durometer or Rubber hardness tester. Acknowledged widely as well as demanded owing to their hassle free and standard operations, operational fluency and effectiveness, Durometers offered by us are first tested perfectly and then delivered. Products available with us comes from popular manufacturing and distributing brands like Mitutoyo, Baker, Groz, Kann, Metrix and Kristeel. Easy operations, less maintenance, and reliable performance are some of the best key phrases that can be used for defining the range of Durometer/ Rubber hardness testers available with us.

Available with us are Rubber Hardness Tester that are high in performance and are easy to operate. Widely used across different industries, these rubber hardness tester are engineered to perfection adopting innovative technologies. We also endeavor to satisfy our clients spread worldwide by offering our range of rubber hardness tester as per the designs and specifications of our clients. Range:- 0 to 100 shore. Compact model and easy operate.

The Different types of rubber hardness tester include

• Shore-A Digital Rubber hardness tester

• Shore-A Analog Rubber hardness tester

• Shore-D Digital Rubber hardness tester

• Shore-D Analog Rubber hardness tester

When it comes to buying Ultra Unit Vice, customers go haywire as which supplier to rely on for quality product. You can stay assured that if you trust us that is Bearing Tool Centre, you will get advanced and updated laboratory measuring and testing equipment. The equipment that we sell comes from the house of reputed brand and comes with guarantee. So, wait no more and place order at our online store and get the equipment delivered at your doorstep within the time given by us. We make sure that you get the equipment on time as we value our customers.

• Hardend and precision ground.                      
• Multiple Parallel vise for small parts grinding, milling & on VMC M/C.
• Since stoppers are provided, multiple works can be accurately positioned
• The Jaw can be easily removed from the main body so that sludge cleaning
can be easily done
• Made from high quality alloy steel.
• Hardness 55± 2 Rc

We are one of the renowned importers and suppliers of Stop Watch – Mechanical in latest technology and designs. These are manually operated Watches, offered with user friendly options and provide accurate and reliable readings. Engineered using latest technology, these are quality tested products and are offered at industry leading prices.

Mechanical, Stop Watches:

• Stop Watch, 1/10th Second, "Diamond"  make, Single Button Model 504
• Stop Watch, 1/10th Second, "Diamond" China make, Double Button
• Stop Watch, 1/5th Second, "Diamond" make, Single Button
• Stop Watch, 1/5th Second, "Diamond" make, Double Button
• Stop Watch, 1/100 Min, "Diamond" make, Double Button
• Stop Watch, 1/10th Seconds "RACER" (Asse),
• Stop Watch, 1/10th Seconds "SHINCO" Russian make.
• Stop Watch, 1/10th Seconds "GEM" make

• Accuracy: 1/100 sec 
• Shock Proof
• Plastic Grip
• Accessory: 40" Neck Cord