Ultra

• Used for clamping of round and flat jobs during EDM operation, Light machining, Grinding or Drilling & Inspection
• Accuracy for Flatness, Sqareness & Parallelism within 0.005mm. 120L & 0.010mm. upto
170L of 'v' Block
• Uniform magnetic pull
• Three magnetic surfaces top, Bottom & V faces
• Hardness of V face is 60±2 Rc.

Sr.No.

Cat No.

Size (mm)

Range (mm)

• Used for Grinding, Light Milling, Drilling & Inspection of Round & square jobs,
• Accuracy for Parallelism is within ±0.005mm
• Provided with ON-OFF switch except for 1" block
• Supplied in perfect matched pair. Harden Strips provided in hard pair

Sr. No.

Cat No.

Size (mm)

•Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Flatness, Squareness and Parallelism within 0.010mm. up to 150W
above that 0.020mm up to 200W
• Hardness 60±3 Rc.
• Supplied in perfect matched pair.
• Supplied with clamp which can be used from both sides to suit job dimensions
• Holds & Clamps the heavy jobs rigidly.
• Can also be used for end face, side face and right angle Grinding

Sr.No.

Cat No.

Size (mm)

Range (mm)

65L X 150W X 75H

Ø 5 - Ø 100

65L X 175W X 100H

Ø 5 - Ø 125

75L X 200W X 125H

Ø 5 - Ø 150

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Flatness, Squareness and Parallelism within 0.010mm up to 150W above that 0.020mm up to 200W
• Tenon slot (16 x 3) at bottom can be used for clamping on machine bed.
• Hardness 60 ± 3 Rc
• Entire top of V is accessible due to unique design.
• Supplied in perfect matched pair.

Sr.No.

Cat No.

Size (mm)

Range (mm)

75L X 120W X 60H

Ø 3 - Ø 50

100L X 150W X 75H

Ø 5 - Ø 75

125L X 200 X 100H

Ø5 - Ø 100

Sr.No.

Cat No.

Size

Range (mm)

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Squareness, Flatness & Parallelism 0.010 up
to 150W & 0.020 up to 200W.
• Grade A- made from alloy steel material & Hardness is 60±2 Rc.
• Grade B - made from hard cast iron & scrapped
• Four different 90⁰ V opening to suit various sizes.
• Supplied in perfect matched pair.
• Also available to suit your specifications.

Sr.No.

Cat No.

Size (mm)

63L X 100W X 100H

80L X 160W X 160H

100L X 200 X 200H

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Flatness, Squareness and Parallelism within 0.010mm. 
• Can be used on its base, the ends & on either side. 
• Hardness 60±2 Rc. 
• M10 tapping at base M8 tapping on side for clamping on angle plate or
   face plate or on magnetic chuck. 
• A clamp with cap & adjustable screws prevents tilting of block.
• A clearance hole at centre for drilling or removing of dowel pins.
• The "V" at stepped end at right angle to the base provides a
   handy means for holding shouldered studs round pins etc.

Sr.No.

Cat No.

Size

Range (mm)

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy 0.010mm.
• Hardness 60±2 Rc.
• Supplied in perfect matched pair
• Top angle 120°
• Bottom angle 90°
• Suitable for checking of lobbing.
• Sturdy clamps for better clamping of the job

Cat No.

• Suitable for drilling & light machining.
• Easy to operate.
• Time saving as machincal clamps are avoided.
• Economical for operation & maintenance.
• Powerful holding with the magnet.
• Vertical lifting force is 35 to 40 kg per cm sq.

• IS : 5939-1970
• Used for Precision measurement, setting of angles
utilizing slip gauge & light machining.
• Ideal for high accuracy grinding operations
• Accuracy for squareness, Parallelism & flatness is
0.010mm upto 200L & 0.015mm upto 450L.
• Positive locking at all angles without any distortion
• Angle can be set within ±5 seconds.
• Centre Distance between rollers is within 0.005mm.
• Made from high quality alloy steel
• Hardness - 58 ± 2 Rc & Tempered.
• Firm clamp to reduce possibility of distortion
• M6 & M8 tapped holes for job clamping.
• Low hight for more wheel clearence
• Stolted sine table on Request
• Also Manufacture as per customers requirement

• Used for checking heavy and odd shaped round jobs.
• Perfectly matched pair. Accuracy :- Paralality 10 micron for ass series
• Included angle of rollers is 90º.
• Standard bearings are used which are replaceable.
• Jobs don't get damaged due to bearing on top.
• Special sizes suitable for different diameter manufactured on request.

Special sizes suitable for different diameter manufactured on request

Sr.No.

Cat No.

Size Top

Range (mm)

(IS : 5939 - 1970)
• Compound Angle facility
• Used for Precision measurement, setting of angles & Light machining.
• Accuracy for Square ness, Flatness & Parallelism within 0.010mm upto 200L & 0.015mm upto 450L.
• Angle can be set within ±5 seconds.
• Centre Distance between rollers is within 0.005mm.
• Made from high quality alloy steel.
• Hardness - 60 ± 2 Rc & Tempered.
• Firm hinged clamp to reduce possibility of distortion.
• M6 & M8 tapped holes for job clamping.

• Produced of high quality steel, carburized to surface hadrdness hrc 58 - 62
• Parallelism 0.008 mm / 100 mm squareness 0.015 mm
• Available inspecting angle and processing working with angle

we Provide NABL Traceble Calibration Certificate, Calibration charges Will Be Extra.

• Produced of high quality steel, carburized to surface hadrdness hrc 58 - 62
• Parallelism 0.008 mm / 100 mm squareness 0.015 mm
• Available inspecting angle and processing working with angle

• Used for marking & transferring measurement
• Base & Scriber are made from hardened steel
• Robust construction
• Fine adjestment for smooth & accurate setting
• Dial indicator can also be used

Cat No.

Base Size (mm)

Height of Column

UL - 50201

130 L x 105 W x 35 H

UL - 50202

160 L x 130 W x 40 H

• Used as holding device for dial indicator.
• Heavy & rigid construction.
• Column can move to & fro to full base length.
• Fine adjustment for accurate setting.
• Both faces of base can be used.

Cat No.

Base Size (mm)

Height of Column (mm)

Max. Horizontal Ext. (mm)

UL - 50301

250 L x 45 W

350

UL - 50302

300 L x 100 W

350

UL - 50303

300 L x 100 W

350

UL - 50304

350 L x 100 W

350

• Made from stainless steel.
• Used for holding the jobs, spark erosion operation, right angle grinding & Light machining.
• Accuracy for Square ness, Flatness & Parallelism within ±0.005mm.
• Jaw pressure on work piece is forward & downward for repeatable positioning & maximum holding power.
• All sides can be used as reference.
• Hardness - 52 ± 3 Rc.
• “V” on moveable jaw for better gripping of round jobs.

Made from stainless steel.

• Used for checking flatness & straightness of surfaces.
• Made from high quality tool steel.
• Hardness 60 ± 2 Rc.
• Plastic head insulator.
• Packed in individual wooden box.

Sr.No.

Cat No

Size (mm)

1.

UL-60201

100 L X 15 H X 5 T [4"]

2.

UL-60202

160 L X 20 H X 8 T [6"]

3.

UL-60203

300 L X 35 H X 12 T [12"]

4.

UL-60204

500 L X 50 H X 15 T [20"]

5.

UL-60205

800 L X 80 H X 20 T [32"]

6.

UL-60206

1000 L X 100 H X 20 T [40"]

- Used to check Squareness & straightness.
- Made from high quality tool steel.
- Packed in individual box.

Cat No

Beam Size (mm)

UL-60701

200 L X 50 W X 60 H

• Used for marking & transferring measurement.
• Ground base for accurate reference surfaces.
• V groove on the front end which allows the spindle to
adjust to any angle above or below the base.
• V groove in the base for cylindrical work.
• A very positive fine adjustment through a rocker arm that makes smooth &
accurate setting.
• Grooves on the side of the base for a sure & easy grip.
• Dial indicator can also be used.
• Two gauge pins facilitate easy linear marking.

Sr.No.

Cat No.

Size

Height

1.

UL- 50101

80 L x 65 w x 300 H [12"]

300

2.

UL- 50102

100 L x 85 W x 450 H [18"]

450

3.

UL- 50103

110 L x 90 W x 600 H [24"]

600

• MADE FROM STAINLESS STEEL
• Useful for holding purpose on wire cut machine.
• Suitable for mounting on machine belt.
• Suitable for round job.
• Hardness 55 ± 3 Rc.
• Accuracy within 15 micron

• Used for Precision measurement, setting of angles, Right angle grinding & light machining.
• Made from high quality alloy steel.
• Accuracy for Squareness, Flatness & Parallelism is 0.010mm / 235 L
• Angular accuracy within ± 5 seconds.
• Centre distance between rollers is within ±0.005mm
• Hardness - 60 ± 3 Rc

Made from Stainless steel.

• Used for Precision measurement, setting of angles.
• Made from high quality alloy steel.
• Accuracy for Flatness & Parallelism is within 0.005mm. upto 200mm & 0.010mm
upto 350mm
• Centre distance between rollers is within ±0.003mm
• Hardness - 60 ± 2 Rc & Tempered
• Top surface is provided with magnet

• Used for supporting the job.
• Made from good quality alloy steel material.
• Safe & reliable adjustment of height.
• Locknut for adjustment.
• Can be used with different pads.

- Used to check Squareness & straightness.
- Accuracy for Squareness & Flatness is within +-0.010 mm. / 150H.
- Made from single piece high quality tool steel.
- Inside & outside are accurate right angles.
- A groove on the inner corner of the stock, aids in the clearance of burr or dirt.
- Hardness 60 +- 2 Rc.
- Packed in individual wooden box.

Sr.No.

Cat No

Beam Size (mm)

Cross Section (mm2)

1.

UL-60601

100 x 70

20 x 5

2.

UL-60602

150 x 100

26 x 6

3.

UL-60603

200 x 130

32 x 7

4.

UL-60604

300 x 200

40 x 8

- Used for checking Square ness & straightness.
- Made from single piece high quality tool steel.
- Inner & outer edges of blade are bevelled at 60?? angle.
- Beveled edge provides an excellent visual line contact with the workpiece.
- Hardness 60 +- 2 Rc.
- A groove on the inner corner of the stock, aids in the clearance of burr or dirt.
- Packed in individual wooden box.

Sr.No.

Cat No

Size (mm)

1.

UL-60401

50 L x 35 W x 4 T [ 2" ]

2.

UL-60402

75 L x 50 W x 4.5 T [ 3" ]

3.

UL-60403

100 L x 70 W x 5 T [ 4" ]

4.

UL-60404

150 L x 100 W x 6 T [ 6" ]

5.

UL-60405

200 L x140 W x7 T [ 8" ]

6.

UL-60406

250 L x165 W x 8 T [ 10" ]

7.

UL-60407

300 L x 200 W x8 T [ 12" ]

8.

UL-60408

400 L x 250 W x 10 T [ 16" ]

- Used for checking flatness & straightness of surfaces.
- All accuracies as per IS : 3512 - 1966.
- Made from high quality tool steel.
- Knife edge provides an excellent visual line contact with the work piece.
- Hardness 60 +- 2 Rc.
- Packed in individual wooden box.

Sr.No.

Cat No

Size (mm)

1.

UL-60101

50 L x 30 W x 8 T [ 2" ]

2.

UL-60102

75 L x 35 W x 8 T [ 3" ]

3.

UL-60103

100 L x 40 W x 10 T [ 4" ]

4.

UL-60104

150 L x 40 W x 10 T [ 6" ]

5.

UL-60105

200 L x 50 W x 12 T [ 8" ]

6.

UL-60106

250 L x 50 W x 12 T [ 10" ]

7.

UL-60107

300 L x 60 W x 12 T [ 12" ]

8.

UL-60108

500 L x 60 W x 15 T [ 20" ]

9.

UL-60109

600 L x 60 W x 20 T [ 24" ]

- Used for checking Squareness & straightness.
- All accuracies as per IS : 2103 - 1980.
- Made from single piece high quality tool steel.
- Hardness 60 +- 2 Rc.
- A groove on the inner corner of the stock, aids in the clearance of burr or dirt.
- Packed in individual wooden box.

Sr.No.

Cat No

Size (mm)

1.

UL-60501

100 L x 70 W x 10 T [ 4" ]

2.

UL-60502

150 L x 100 W x 12 T [ 6" ]

3.

UL-60503

200 L x140 W x 15 T [ 8" ]

4.

UL-60504

250 L x 165 W x 20 T [ 10" ]

5.

UL-60505

300 L x200 W x20 T [ 12" ]

6.

UL-60506

400 L x250 W x 25 T [ 16" ]

7.

UL-60507

500 L x 300 W x 25 T [ 20" ]

8.

UL-60508

700 L x450 W x 30 T [ 28" ]

9.

UL-60509

1000 L x750 W x 40 T [ 40" ]

• Used for Precision measurement, setting of angles.
• Made from high quality alloy steel.
• Accuracy for Squareness, Flatness & Parallelism is within 0.005mm. upto 200mm & 0.010 mm upto 350mm
• Centre distance between rollers is within ±0.003mm
• Hardness - 60 ± 2 Rc & Tempered
• Top surface is provided with magnet
• Accuracy as per IS Standards IS 5359-1987

• Used for lifting & handling of ferromagnetic particles
• Strong magnetic field to lift large quantity of particles
• Particles are detached by separating lower plate form upper magnetic body
• Magnetic Sweeper can fit to any forklift

Sr.No.

Cat No

Size (mm)

1.

UL-81201

800 x 260

2.

UL-81202

1000 x 260

3.

UL-81203

1200 x 260

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Can lift the job from 150mm
• Useful for the shop floor & scrap yard.
• Hydraulic jack for easy releasing.

Sr.No.

Cat No

Size (mm)

1.

UL-21101

450 x 300

2.

UL-21102

600 x 300

3.

UL-21103

900 x 300

- Used for checking of heavy round & cylindrical jobs.
- Supplied in perfectly matched pair having accuracy 0.001mm.
- Four hard steel balls on top face provides self- aligning, hard wearing,
accurate support.
- Ball wearing is even, so accuracy doesn't get affected.
- Ball can be replaced and readjusted with minimum effort & cost

??

Cat No.

- Used for accurate & quick angle setting during Inspection, tool setting & machining
- Made from special quality alloy steel material
- Hardness 60 +- 2 Rc

• Used with boring bar for presetting of cutting tool
• Change in setting of the tool measures variation in bore dimension.
• Powerful magnet without ON-OFF facility.
• “V” is hardened & ground within 5 micron.
• The included angle of V is 120º.
• Hardness 52 - 56 Rc.
• Also manufactured as per customer's requirement

Sr.No.

Cat No

Size (mm)

Range (mm)

1.

UL - 50601

100 L x 50 H x25 T

Ø 20 - Ø 90

2.

UL - 50602

110 L x 45 H x 22 T

Ø20 - Ø 75

3.

UL - 50603

90 L x 40 H x 22 T

Ø 45 - Ø 100

• Used with boring bar for presetting of cutting tool.
• Change in setting of the tool measures variation in bore
dimension.
• Suitable clamp is provided for holding dial indicator
(for UL - 50504 & UL - 50505)
• Powerful magnet with ON-OFF facility.
• “V” is hardened & ground within 5 microns.
• The included angle of V is 90º.
• Hardness 52 - 56 Rc.
• Also manufactured as per customer's requirement.

Sr.No.

Cat No

Size (mm)

Slot (mm)

Range (mm)

1.

UL - 50501

72 L x 68 H x 35 T

14 x 2

Ø 25 - Ø 70

2.

UL - 50502

76 L x 75 H x 35 T

14 x 2

Ø 35 - Ø 90

3.

UL - 50503

80 L x 75 H x 40 T

14 x 2

Ø 40 - Ø 105

4.

UL - 50504

100 L x 85 H x 40 T

14 x 2

Ø 40 - Ø 125

5.

UL - 50505

120 L x 90 H x 40 T

14 x 2

Ø 110 - Ø 180

- Used for removing ferrous chips or particles from blind or taping holes, corners or slots of machine table.
- Compact design, uses strong magnets
- Magnet depth is 20 mm from one end
- Stainless steel body to avoid corrosion.
- Special sizes can also be manufactured.
- Magnetic stick with handle is also available