Baker

12.5 x 0.001 mm / 0.5 x 0.00005 inch
25.4 x 0.001 mm / 1.0 x 0.00005 inch

Baker - Authorized Dealer
Modvat available in case of order value more than 20000/-

Baker , Swastik and Advance make. Available in all Tolerances.

• A sturdy and robust dial gauge.
• Fitted with special brass bush bearings.
• Supplied with tolerance pointers.
• Strong and smooth metal bezel.
• Rigid, metal case.
• Aesthetically appealing protective top cap.
• Tungsten carbide ball anvil.
• Metric gauges conform to IS2092-1983 and for the European market to DIN878-1983.
• Inch gauges conform to ASME B89.1.10M-2001.
• Each gauge carries a calibration certificate giving actual values.
• Wide range of dial gauges in various ranges and readings available.
• Special dial gauges for OEMs also manufactured on request.
• Complete spares and after sales service available.
• 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503-1997.
• Exported to over 50 countries all over the world.

Dial gauge with lever to sense the dimension suitable for use in Tool Room to transfer hieghts using a hight gauge to check leveling and runout etc.......

A unique face reading dial gauge with sensing plunger at right angles to the dial.

For the American market, Universal Test Set meeting the requirements of AGD standard available.

Vernier Calipers are available in two types - one with fine adjustment and one without fine adjustment......

Dial Calipers with clear high contrast readable dial......

Attractive shape and elegant design complimented by uncompromising performance

Salient Features:

• Highest degree of Ingress Protection to a hand-held instrument of its type, IP67 (according to IEC 60529).
• Unconditional immunity to penetration of liquids or dust.
• Reliability and Accuracy of measuring tool is assured even in the most hostile workshop environment.
• High contrast Liquid Crystal Display Ergonomic beam design increases comfort; reduces fatigue.
• Equipped with latest and exclusive Swiss measuring technology S.I.S. (Smart Inductive System)

      Measuring ranges :

              ZD10 : 0 – 150 mm
              ZD20 : 0 – 200 mm 
              ZD30 : 0 – 300 mm
 

• Automatic stand-by mode.
• Origin securely saved even in stand-by mode.
• Auto switch-on by motion of slider.
• New, Proximity type, contactless RS232 data output allows user to store and analyse measurement data in PC or any other digital data storage apparatus.
• Errors conform to DIN 862.
• Every caliper furnished with Certificate of Calibration stating actual values and errors.

Baker PFL is a Null Balance Indication system that is based on the measurement of airflows for differnt dimensions. has extended linearity over higher range.....

Salient Features:

•       Quick and easy checking of bore size, taper & Ovality.
•       With extensions to check deeper bores.
•       Can be supplied to check though or blind bores.
•       Can be supplied with multiple jets.
•       Can be supplied specially to suit components.
•       Can be supplied with Tungsten Carbide wear pads on request.

      

Air Ring Gauges and Setting Plugs from 2.00mm to 200mm  ............

Air Callipers and Setting Discs from 10mm to 150mm in standard two jet desigh to check through or shouldered shafts....

Twin Channel Electronic Comparators

•  Twin channel gauge units with selectable probe combinations of +A, -A, +B, -B, +A +B, +A -B, -A +B, -A -B.
•  Inch and Metric measuring ranges.
•  RED, GREEN and YELLOW tolerance indication for UNDERSIZE-OK-OVERSIZE condition.
•  Data output.
•  Comprehensive outputs for further processing.
•  Compatible with Half-bridge and LVDT type inductive measuring probes.
•  Sturdy, Ergonomic design, suitable for shopfloor   environment .
•  Add-on Modules available for further processing

The microprocessor based Electronic units open up a new set of gauging applications with their ability to do programming according to a wide variety of applications.
Analog, Digital and Column display having similar basic features........

Masters form the base standards when it comes to comparative measurement of components on the shop floor. Master Setting Rings and Discs when calibrated become the basic operational standards in general metal working industry.

Our multi-gauging solutions range from a simple multiple diameter checking to relational parameter like squareness, center distance etc to Semi-Automatic to completely automatic inline multi-gauging machines. From conceptualizing to final delivery of the solution needs inputs equally from our Customer as we believe he is the expert in manufacturing the part and we are who can provide the gauging due to this fact lot depends on the collaborative effort from both sides as this has to be one way passage to success.

Baker introduce yet another complementary product to their wide range of products to meet yet another requirement of the metal working industry.....

We manufacture Metric, Unified,  G Series, NPT, NPTF, ANPT, NGT, ISO-7R, Taper 1:8, Acme, Stub Acme, Trapezoidal, Buttress, Cycle Threads, PT, PF, Helicoil, Square, Round, Pg Thread Gauges as per the applicable IS, ISO, BS, ANSI, DIN & JIS standards.
We also manufacture Multi-start & Special Thread Gauges to Customer requirements

METRIC                                 
IS 2967 - 1983                        
ISO 3611 - 1978                     
DIN 863 (Part 1) - 1999
JIS B 7502 - 1994

INCH
American Standard
(FEDERAL GGG-C-105C)

Digital Micrometers
Available upto 100 mm.
Each micrometer supplied with a certificate of calibration.
Real value for money.

This range includes Tube Micrometers, Blade Micrometers, Disc Micrometers, Point Micrometers & Spline Micrometers.

Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 – 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads are supplied with UKAS certification.

Bowers XT Digital Xtreme internal micrometers give the operator the advantage of traditional quality ratchet gauges allied to advanced IP65 electronics. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems. Measuring heads for threads, splines slots, grooves, deep-holes and many more applications are available on request.
The Bowers XT range of internal micrometers can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of  measuring head as standard.

The Bowers XT Holematic Xtreme bore gauge incorporates an ergonomic pistol grip handle with an advanced trigger action, giving the user the advantages of both speed of operation and a constant measuring pressure. The clear digital display, superior IP65 electronics and application range of 2 to 300mm ensures ease of use and assured accuracy.
The XT Holematic pistol grip range of bore gauges can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of  measuring head as standard.

The bowers xt500 large diameter 3-point bore-gauge has been designed specifically for the measurement of internal diameters between 300 and 500 mm. The newly designed constant-force digital readout ensures that the measuring pressure remains constant throughout the measurement whilst radiussed measuring anvils provide optimum centralisation in the part. Anvil sets are supplied in 25 mm steps (300-325, 325-350 etc) and each set has been manufactured to the exact toleranced size. The 300-325mm anvils are the master reference set and are used for setting the gauge in the setting ring. The other anvil sets are then fitted as required without further re-setting. This means that only one 300mm setting ring is required to set the gauge for all diameters in the full 300-500mm range of the instrument.

Although Bowers produces the most comprehensive series of bore gauges and internal measuring equipment available, not all applications can be covered by our standard instrument range. In line with our customer care ethos, Bowers has earned a reputation for manufacturing special heads for measuring non-standard applications. Click on read more for examples of some of the many difficult measuring problems easily solved by these special heads.

Spline Gauges Ltd. is the World's largest producer of spline gauges and master gears - a position of authority based on absolute specialisation and supreme quality.

SGL obtained this position by pioneering advanced techniques, applying high technology, and accumulating unique resources of skill.

SGL quality assurance policy is simple: total commitment. Spline Gauges has more coordinate measuring machines than all UK competitors combined.

SGL inspectors have at their disposal what is, without doubt, the most comprehensive gear and spline testing facility within the gauge making industry of the world. SGL inspection is autonomous, totally divorced from manufacturing management.

The Bowers Universal Gauge’s ingenious modular format enables it to be quickly configured to suit almost any measuring challenge, both internal and external. The Universal’s clever constant pressure device ensures accuracy and consistency of reading.

A large variety of measuring contacts and adaptors are available for the Universal Gauge enabling countless measuring tasks to be completed with ease. Accessories for the measurement of threads, grooves, splines, gears, hole centres, and many others are available as standard and special adaptations for more unusual applications can be quoted on request.

Plain Plug Gauges H7 And Other STD With Certificate Swastik Advance / Baker Make